Cycloid reducer output shaft can not be greater axial and radial forces are larger in the axial and radial force to take other measures. A cycloidal gear planetary drive with small teeth difference principle of new deceleration devices, can be widely used in petroleum, chemical, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driver or deceleration device, suitable for working temperature of plus or minus 40 degrees, so cycloid reducer was widely welcomed by users, and in all industries and areas have been widely used 
 Description: 
 1. Cycloid gear system allows the use of the occasion in a continuous work, while allowing the positive and negative work in both directions. 
 2. Input shaft rotation speed rating of 15 mobile turn, points in the input power is greater than 18.5 kwh recommended 960 rev / min for 6 poles supporting the use of the motor. 
 3. Horizontal cycloid reducer installed in the working position are horizontal position. Maximum level of the installation angle of inclination generally less than 15 °. More than 15 ° should be used in other measures to ensure adequate lubrication and to prevent oil leakage.